{"id":30,"date":"2016-05-12T09:47:18","date_gmt":"2016-05-12T09:47:18","guid":{"rendered":"http:\/\/qufaculty.qu.edu.qa\/asleiti\/?page_id=30"},"modified":"2021-03-14T06:40:41","modified_gmt":"2021-03-14T06:40:41","slug":"publication","status":"publish","type":"page","link":"http:\/\/qufaculty.qu.edu.qa\/asleiti\/publication\/","title":{"rendered":"Publications"},"content":{"rendered":"

Book chapter<\/u><\/strong><\/p>\n

Ahmad K. Sleiti<\/strong>, and Wahib A. Al-Ammari, \u201cCO2<\/sub> Transportation: Safety Regulations and Energy Requirement\u201d, Elsevier 2021.<\/p>\n

Peer Reviewed Journal Publications<\/u><\/strong><\/p>\n

    \n
  1. Ahmad K. Sleiti<\/strong>, Wahib A. Al-Ammari, Energy and exergy analyses of novel supercritical CO2<\/sub> Brayton cycles driven by direct oxy-fuel combustor, Fuel, Volume 294, 2021, 120557, ISSN 0016-236. https:\/\/doi.org\/10.1016\/j.fuel.2021.120557<\/a>. (https:\/\/www.sciencedirect.com\/science\/article\/pii\/S0016236121004336<\/a>)<\/li>\n
  2. Ahmad K. Sleiti<\/strong>, Wahib A. Al-Ammari, Mohammed Al-Khawaja, Integrated novel solar distillation and solar single-effect absorption systems, Desalination, Volume 507, 2021, 115032, ISSN 0011-9164, https:\/\/doi.org\/10.1016\/j.desal.2021.115032<\/a>. (https:\/\/www.sciencedirect.com\/science\/article\/pii\/S001191642100103X<\/a>)<\/li>\n
  3. Ahmad K. Sleiti<\/strong>, \u201cDataset for measured viscosity of Polyalpha-Olefin- boron nitride nanofluids\u201d, Journal of Data In Brief, 35 (2021) 106881, https:\/\/doi.org\/10.1016\/j.dib.2021.106881<\/a>. Available online 15 February 2021. ISSN 2352-3409.<\/li>\n
  4. Elbeh MB, Sleiti AK.<\/strong> Analysis and optimization of concentrated solar power plant for application in arid climate. Energy Sci Eng. 2021;00:1\u201314. https:\/\/doi.org\/10.1002\/ese3.742<\/a>. ISSN: 2050-0505. Society of Chemical Industry and John Wiley & Sons, Ltd.<\/li>\n
  5. Abdellatif M. Sadeq, Samer F. Ahmed, Ahmad K. Sleiti<\/strong>, Transient 3D simulations of turbulent premixed flames of gas-to-liquid (GTL) fuel in a fan-stirred combustion vessel, Fuel, Volume 291, 2021, 120184, ISSN 0016-2361, https:\/\/doi.org\/10.1016\/j.fuel.2021.120184<\/a>. (http:\/\/www.sciencedirect.com\/science\/article\/pii\/S0016236121000600<\/a>).<\/li>\n
  6. Takalkar, G., Sleiti, A.K. Comprehensive performance analysis and optimization of 1,3-dimethylimidazolylium dimethylphosphate-water binary mixture for a single effect absorption refrigeration system. Front. Energy (2021). https:\/\/doi.org\/10.1007\/s11708-021-0720-9<\/a>. Springer, Electronic ISSN 2095-1698. Print ISSN 2095-1701<\/li>\n
  7. Sleiti, A. K.<\/strong>, Al-Ammari, W. A., and Al- Khawaja, M. (January 18, 2021). “Analysis of Novel Regenerative Thermo-Mechanical Refrigeration System Integrated With Isobaric Engine.” ASME. J. Energy Resour. Technol. May 2021; 143(5): 052103. (10 pages), https:\/\/doi.org\/10.1115\/1.4049368<\/a>. Published Online: January 18, 2021. Paper No: JERT-20-1551. ISSN 0195-0738.<\/li>\n
  8. Ahmad K. Sleiti<\/strong>, Samer F. Ahmed, Saud A. Ghani, “Spreading of SARS-CoV-2 via heating, ventilation and air conditioning systems \u2013 An overview, energy perspective and potential solutions.” J. Energy Resour. Technol. Aug 2021, 143(8): 080803 (10 pages), doi: https:\/\/doi.org\/10.1115\/1.4048943<\/a><\/li>\n
  9. Ahmad K. Sleiti<\/strong>, Hamza Al-Khawaja, Hassan Al-Khawaja and Mohammed Al-Ali, \u201cHarvesting Water from Air Using Adsorption Material \u2013 Prototype and Experimental Results\u201d, Separation and Purification Technology, 257 (2021) 117921, https:\/\/doi.org\/10.1016\/j.seppur.2020.117921<\/a><\/li>\n
  10. Ahmad K. Sleiti<\/strong>, \u201cHeat transfer measurements of Polyalpha-Olefin- boron nitride nanofluids for thermal management and lubrication applications\u201d, Journal of Case Studies in Thermal Engineering, 22 (2020) 100776. https:\/\/doi.org\/10.1016\/j.csite.2020.100776<\/a>.<\/li>\n
  11. Ahmad K. Sleiti<\/strong>, \u201cIsobaric Expansion Engines Powered by Low Grade Heat \u2013 Working Fluids Performance and Selection Database for Power and Thermo\u2010Mechanical Refrigeration\u201d, Journal of Energy Technology, Volume 8, Issue 11, 2020 (2000613):1-16, First Published: 18 September 2020, https:\/\/doi.org\/10.1002\/ente.202000613<\/a>.<\/li>\n
  12. Ahmad K. Sleiti<\/strong>, Mohammed Al-Khawaja, Wahib A. Al-Ammari, \u201cA combined thermo-mechanical refrigeration system with isobaric expander-compressor unit powered by low grade heat \u2013 Design and analysis\u201d, International Journal of Refrigeration (2020), Volume 120, December 2020, Pages 39-49, doi: https:\/\/doi.org\/10.1016\/j.ijrefrig.2020.08.017<\/a>. ISSN: 0140-7007. Published by Elsevier Ltd.<\/li>\n
  13. Ahmad K. Sleiti<\/strong>, Wahib A. Al-Ammari, Mohammed Al-Khawaja, \u201cReview of innovative approaches of thermo-mechanical refrigeration systems using low grade heat\u201d, Int J Energy Res. Volume 44, Issue13, 25 October 2020, Pages 9808-9838. https:\/\/doi.org\/10.1002\/er.5556<\/a>. Online ISSN:1099-114X . \u00a9 John Wiley & Sons Ltd<\/li>\n
  14. Mohammed Karbon & Ahmad K. Sleiti<\/strong> | (2020) Large-eddy simulation of the flow in Z-Shape duct, Cogent Engineering, 7:1, 1778349. Publisher: Taylor & Francis. https:\/\/www.tandfonline.com\/doi\/full\/10.1080\/23311916.2020.1778349<\/a>. Online ISSN: 2331-1916.<\/li>\n
  15. Ahmad K. Sleiti<\/strong>, Gorakshnath Takalkar, Muftah H. El-Naas, Abu Rashid Hasan and Mohammad Azizur Rahman, \u201cEarly Gas Kick Detection in Vertical Wells via Transient Multiphase Flow Modelling: A Review\u201d, Journal of Natural Gas Science and Engineering, Volume 80, August 2020, 103391, https:\/\/doi.org\/10.1016\/j.jngse.2020.103391<\/a>. ISSN: 1875-5100.<\/li>\n
  16. Ahmad K. Sleiti<\/strong>, Wahib A. Al-Ammari and Mohammed Al-Khawaja, \u201cA novel solar integrated distillation and cooling system\u201d, Journal of Solar Energy, Volume 206, August 2020, Pages 68-83, https:\/\/doi.org\/10.1016\/j.solener.2020.05.107<\/a>. ISSN: 0038-092X.<\/li>\n
  17. Mohammed Shublaq and Ahmad K. Sleiti<\/strong>, \u201cExperimental Analysis of Water Evaporation Losses in Cooling Towers Using Filters\u201d, Journal of Applied Thermal Engineering ISSN:\u00a01359-4311, Volume 175<\/a>, 5 July 2020, 115418, Pages 1-10. org\/10.1016\/j.applthermaleng.2020.115418<\/a>.<\/li>\n
  18. Mohammed Karbon and Ahmad K. Sleiti<\/strong>, \u201cTurbulence Modeling using Z-F and RSM Models for Flow in Z-Shape Ducts\u201d, Journal of Engineering, Volume 2020, Article ID 4854837, 10 pages, https:\/\/doi.org\/10.1155\/2020\/4854837<\/a>. ISSN: 2314-4904 (Print), ISSN: 2314-4912 (Online).<\/li>\n
  19. Abdellatif M. Sadiq, Ahmad K. Sleiti<\/strong> and Samer F. Ahmed, \u201cTurbulent Flames in Enclosed Combustion Chambers: Characteristics and Visualization – a Review\u201d, ASME Journal of Energy Resources Technology, August 2020, Vol. 142, Issue 8, 080801 (17 pages), https:\/\/doi.org\/10.1115\/1.4046460<\/a>, Published Online: March 13, 2020.<\/li>\n
  20. Ahmad Sleiti<\/strong>, Mohammad Salehi, and Stephen Idem (2017) \u201cDetailed velocity profiles in close-coupled elbows – measurements and Computational Fluid Dynamics predictions (RP-1682)\u201d, Science and Technology for the Built Environment, Vol. 23, Iss. 8, 2017, Pages 1212-1223. http:\/\/dx.doi.org\/10.1080\/23744731.2017.1285176<\/a>.<\/li>\n
  21. Ahmad K. Sleiti, <\/strong>(2017), \u201cTidal power technology review with potential applications in Gulf Stream\u201d. Elsevier Journal of Renewable & Sustainable Energy Reviews, Volume 69, March 2017, Pages 435\u2013441. http:\/\/dx.doi.org\/10.1016\/j.rser.2016.11.150<\/a>.<\/li>\n
  22. Mohammad Salehi, Ahmad K. Sleiti<\/strong> & Stephen Idem (2017) \u201cStudy to identify computational fluid dynamics models for use in determining HVAC duct fitting loss coefficients\u201d, Science and Technology for the Built Environment, 23:1, 181-191, https:\/\/doi.org\/10.1080\/23744731.2016.1204889<\/a><\/li>\n
  23. Mohammad Salehi, Stephen Idem and Ahmad K. Sleiti<\/strong>, (2017), \u201cExperimental Determination and Computational Fluid Dynamics Predictions of Pressure Loss in Close-Coupled Elbows\u201d, Journal of Science and Technology for the Built Environment. Vol. 23, Iss. 7, 2017. http:\/\/dx.doi.org\/10.1080\/23744731.2016.1268904<\/a>.<\/li>\n
  24. Ahmad K. Sleiti<\/strong> and Edward J. Naimaster, IV, (2016), \u201cApplication of Fatty Acid Based Phase-Change Material to Reduce Energy Consumption from Roofs of Buildings\u201d, J. Sol. Energy Eng. Oct 2016, 138(5): 051003 (7 pages), https:\/\/doi.org\/10.1115\/1.4033574<\/a>.<\/li>\n
  25. K. Sleiti (2015) Overview of Tidal Power Technology, Energy Sources, Part B: Economics, Planning, and Policy, 10:1, 8-13, https:\/\/doi.org\/10.1080\/15567240903585995<\/a><\/li>\n
  26. K. Sleiti<\/strong> & A. Mehrabian (2015) Case Study of a Cost-effective Small Wind Turbine, Energy Sources, Part B: Economics, Planning, and Policy, 10:2, 132-138, https:\/\/doi.org\/10.1080\/15567240903419385<\/a><\/li>\n
  27. Ahmad Sleiti, <\/strong>\u201cTransient Thermal Analysis of Electric Generators\u201d, INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH AND INNOVATION | V5, N2, Pages 88-94, FALL\/WINTER 2013. Print ISSN: 2152-4157, Online ISSN: 2152-4165, http:\/\/ijeri.org\/IJERI-Archives\/issues\/fall2013\/Z__IJERI%20fall%202013%20v5%20n2%20(PDW-3).pdf#page=90<\/a>.<\/li>\n
  28. Ahmad K. Sleiti<\/strong>, \u201cExperimental Measurement of Viscosity of Boron Nitride-Polyalpha Olefin Nanofluid\u201d TSEST Transaction on Control and Mechanical Systems, Vol. 1, No. 8, PP. 330-334, PUBLISHED: 3, JAN., 2013. http:\/\/tsest.org\/index.php\/TCMS\/article\/viewFile\/73\/56<\/a>.<\/li>\n
  29. Ahmad K Sleiti, <\/strong>John Zhai and Stephen Idem, \u201cComputational Fluid Dynamics to Predict Duct Fitting Losses: Challenges and Opportunities\u201d. HVAC&R Research, Volume 19, 2013 – Issue 1, Pages 2-9, http:\/\/www.tandfonline.com\/doi\/abs\/10.1080\/10789669.2012.716341<\/a>. https:\/\/doi.org\/10.1080\/10789669.2012.716341<\/a><\/li>\n
  30. J. Naimaster IV and A.K. Sleiti<\/strong>, \u201cPotential of SOFC CHP Systems for Energy Efficient Commercial Buildings\u201d, Energy and Buildings\u201d, Volume 61, June 2013, Pages 153\u2013160. http:\/\/dx.doi.org\/10.1016\/j.enbuild.2012.09.045<\/a>.<\/li>\n
  31. K. Sleiti<\/strong>, \u201cHeat Transfer and Pressure Drop through Rectangular Helical Ducts\u201d, Journal of Renewable and Sustainable Energy, 3, 043119 (2011); doi:10.1063\/1.3625252. ISSN 1941-7012. https:\/\/doi.org\/10.1063\/1.3625252<\/a><\/li>\n
  32. K. Sleiti<\/strong>, \u201cPerformance of tubular Solid Oxide Fuel Cell at reduced temperature and cathode porosity<\/a>\u201d, Journal of Power Sources, Volume 195, Issue 17, 1 September 2010, Pages 5719-5725. doi:10.1016\/j.jpowsour.2010.03.044<\/a>. ISSN: <\/strong>0378-7753<\/li>\n
  33. Shruba Ganopadhyay Art\u00ebm E. Masunov, Talgat Inerbaev, Jaruwan Mesit, Ratan K. Guha, Ahmad K. Sleiti<\/strong> and Jay S. Kapat, \u201cUnderstanding oxygen vacancy migration and clustering in barium strontiumcobalt iron oxide\u201d, Solid State Ionics<\/u><\/a>, Volume 181, Issues 23-24<\/u><\/a>, 4 August 2010, Pages 1067-1073. http:\/\/www.sciencedirect.com<\/a><\/li>\n
  34. J. Naimaster and A.K. Sleiti<\/strong>, \u201cEffects of Electrode Microstructure on Intermediate Temperature Solid Oxide Fuel Cell Performance\u201d Journal of Fuel Cell Science and Technology, October 2010, Volume 7,\u00a0Issue 5,\u00a0PP 051-015. https:\/\/doi.org\/10.1115\/1.4000683<\/a><\/li>\n
  35. K. Sleiti<\/strong>, “Transient Flow of Air through Rectangular Vents in Horizontal Partition”, HVAC&R Research <\/em>Vol. 15, No. 6, November 2009. https:\/\/www.tandfonline.com\/doi\/abs\/10.1080\/10789669.2009.10390883<\/a><\/li>\n
  36. K. Sleiti<\/strong>, \u201cDesign and Pressure Loss Reduction in the Hydrogen Flow Heat Exchanger with Tube Bundles\u201d, the Technology Interface Journal, <\/em>Volume 9 No. 2, Spring 2009, ISSN# 1523-9926, http:\/\/tiij.org\/issues\/issues\/spring2009\/12_Sleiti\/Sleiti-Tube-Bundles.pdf<\/a>.<\/li>\n
  37. K. Sleiti<\/strong> \u201cEffect of Vent Aspect Ratio on Unsteady Laminar Buoyant Flow Through Rectangular Vents in Large Enclosures\u201d, International Journal of Heat and Mass Transfer 51 (2008) 4850\u20134861. https:\/\/doi.org\/10.1016\/j.ijheatmasstransfer.2008.02.027<\/a><\/li>\n
  38. Quan Liu, K. Sleiti<\/strong>, and J. S. Kapat, \u201cApplication of Pressure and Temperature Sensitive Paints for Study of Local Heat Transfer to\u00a0 a Circular Impingement Air Jet\u201d International Journal of Thermal Sciences 47 (2008) 749\u2013757. https:\/\/doi.org\/10.1016\/j.ijthermalsci.2007.06.018<\/a><\/li>\n
  39. K. Sleiti<\/strong> and J. S. Kapat, 2008, \u201c Effect of Coriolis and Centrifugal Forces on Turbulence and Transport at High Rotation and Density Ratios in Rib-Roughened Channel\u201d, International Journal of Thermal Sciences 47 (2008) 609\u2013619, https:\/\/doi.org\/10.1016\/j.ijthermalsci.2007.06.008<\/a><\/li>\n
  40. K. Sleiti<\/strong> , 2007, \u201cAdvanced cooling technology for rotors of high-power low-duty cycle generators using polyalphaolefins\u201d Journal of Synthetic Lubrication, Vol. 24, No.2, pp. 77-90, March 2007, https:\/\/doi.org\/10.1002\/jsl.30<\/a><\/li>\n
  41. K. Sleiti<\/strong> and J. S. Kapat, 2006, \u201cEffect of Coriolis and Centrifugal Forces at High Rotation and Density Ratios<\/em>\u201d, AIAA Journal of Thermophysics and Heat Transfer, Volume 20, No. 1, pp. 67-79. https:\/\/doi.org\/10.2514\/1.14847<\/a><\/li>\n
  42. Kumar, A. K. Sleiti<\/strong> and J. S. Kapat, 2006\u201d Unsteady Laminar Buoyant Flow Through Rectangular Vents in Large Enclosures<\/em>\u201d, AIAA Journal of Thermophysics and Heat Transfer, Vol. 20, No.2, pp. 276-284, April-June 2006. https:\/\/doi.org\/10.2514\/1.11438<\/a><\/li>\n
  43. K. Sleiti<\/strong> and J. S. Kapat, 2006 \u201cAn Experimental Investigation of Liquid Jet Array and Single Phase Spray Impingement Cooling Using Polyalphaolefin<\/em>\u201d, Experimental Heat Transfer Journal, Volume 19, No. 2, pp. 149-163 April 2006. https:\/\/doi.org\/10.1080\/08916150500479349<\/a><\/li>\n
  44. K. Sleiti<\/strong> and J. S. Kapat, 2006\u201d Comparison Between EVM and RSM Turbulence Models in Predicting Flow and Heat Transfer in Rotating Rib-Roughened Channels\u201d. Journal of Turbulence, Volume 7. No.29, pp. 1-21, 2006. https:\/\/doi.org\/10.1080\/14685240500499343<\/a><\/li>\n
  45. K. Sleiti<\/strong> and J. S. Kapat, 2006 \u201c Heat Transfer in Channels in Parallel-Mode Rotating at High Rotation Numbers<\/em> \u201d, AIAA Journal of Thermophysics and Heat Transfer, Vol. 20, No.4, pp. 748-753, October-December 2006. https:\/\/doi.org\/10.2514\/1.16634<\/a><\/li>\n
  46. N R Nagaiah, K. Sleiti<\/strong>, S Rodriguez, J S Kapat, L. An and L. Chow, 2006 \u201cA Novel Design and Analysis of a MEMS Ceramic Hot-Wire Anemometer for High temperature Applications\u201d. J. Phys.: Conf. Ser. 34, pp. 277-282.\u00a0doi:10.1088\/1742-6596\/34\/1\/046<\/li>\n
  47. K. Sleiti<\/strong> and J. S. Kapat, 2005, \u201cFluid Flow and Heat Transfer in Rotating Curved Duct at High Rotation and Density Ratios<\/strong>\u201d, ASME Journal of Turbomachinery, Volume 127, Issue 4, pp. 659-667, https:\/\/doi.org\/10.1115\/1.2019276<\/a><\/li>\n<\/ol>\n

    ***************************************<\/p>\n

    Peer Reviewed Conference Papers <\/u><\/strong><\/p>\n

      \n
    1. Kaushik Manikonda, Abu Rashid Hasan, Abinash Barooah, Muftah El-Naas, Ahmad Khalaf Sleiti<\/strong>, Mohammad Azizur Rahman, \u201cA Mechanistic Gas Kick Model to Simulate Gas in a Riser with Water and Synthetic-Based Drilling Fluid\u201d, SPE-203159-MS, Abu Dhabi International Petroleum Exhibition & Conference, 9-12 November, 2020, Abu Dhabi, UAE, Publisher: Society of Petroleum Engineers, Publication date: 2020\/11\/9, DOI: https:\/\/doi.org\/10.2118\/203159-MS<\/a><\/li>\n
    2. Sleiti A<\/strong>., AlAmmari W., AlKhawaja M., Glushenkov M., Kronberg A., “Subcritical and Supercritical Operation of Innovative Thermal Mechanical Refrigeration System”, Qatar University Annual Research Forum and Exhibition (QUARFE 2020), Doha, 28 October 2020, DOI: https:\/\/doi.org\/10.29117\/quarfe.2020.0006<\/a>. DOI\/handle: http:\/\/hdl.handle.net\/10576\/16541<\/a>. Publisher: Qatar University Press. Best Poster Award<\/strong>.<\/li>\n
    3. Sleiti A.K., AlAmmari W.A., AlKhawaja M. “Novel solar driven cooling system integrated with solar still system”, Qatar University Annual Research Forum and Exhibition (QUARFE 2020), Doha, 28 October 2020, DOI: https:\/\/doi.org\/10.29117\/quarfe.2020.0055<\/a>. DOI\/handle: http:\/\/hdl.handle.net\/10576\/16590<\/a>. Publisher: Qatar University Press.<\/li>\n
    4. Ahmad K. Sleiti and Mohammed Al- Khawaja, \u201cHeat Transfer Analysis of Regenerative Thermo-Mechanical Refrigeration System\u201d, Proceedings of the ASME 2020 Summer Heat Transfer Conference, SHTC2020, July 13-15, 2020, Orlando, Florida, USA. Paper No: HT2020-8901, V001T11A017; 8 pages, https:\/\/doi.org\/10.1115\/HT2020-8901<\/a>, Published Online: September 25, 2020. ASME 2020 Heat Transfer Summer Conference collocated with the ASME 2020 Fluids Engineering Division Summer Meeting and the ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels. ISBN: 978-0-7918-8370-9. https:\/\/asmedigitalcollection.asme.org\/HT\/proceedings-abstract\/HT2020\/83709\/V001T11A017\/1087425<\/a>.<\/li>\n
    5. Mohammed Karbon and Ahmad K. Sleiti, \u201cTurbulence Modeling Using Z-F, RSM, LES and WMLES for Flow Analysis in Z-Shape Ducts\u201d, Proceedings of the ASME 2020 Fluids Engineering Division Summer Meeting, FEDSM2020, July 13-15, 2020, Orlando, Florida, USA, Paper No: FEDSM2020-20001, V003T05A006; 10 pages, https:\/\/doi.org\/10.1115\/FEDSM2020-20001<\/a>. Published Online: October 12, 2020. ASME 2020 Fluids Engineering Division Summer Meeting collocated with the ASME 2020 Heat Transfer Summer Conference and the ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels, ISBN: 978-0-7918-8373-0. https:\/\/asmedigitalcollection.asme.org\/FEDSM\/proceedings-abstract\/FEDSM2020\/83730\/V003T05A006\/1088092<\/a>.<\/li>\n
    6. Ahmad K. Sleiti, Wahib A. Al-Ammari, Mohammed Al-Khawaja1, Maxim Glushenkov and Alexander Kronberg, \u201cInnovative Thermo \u2013 Mechanical Refrigeration System in Subcritical and Supercritical Modes\u201d, Poster Presentation, Qatar University Annual Research Forum and Exhibition 2020, 14-15 April, 2020, QU, Doha, Qatar.<\/li>\n
    7. Ahmad Sleiti, Mohammad Al-Khawaja, Maxim Glushenkov and Alexander Kronberg, \u201cUsing low grade heat for thermo-mechanical refrigeration – Heat-to-cold transformations\u201d, ASHRAE-ORYX, 4th HVAC Contracting Conference \u201cBridging the Gap Between Design, Construction and Facility Management\u201d, Intercontinental Hotel Doha – The City, 23rd & 24th of November 2019.<\/li>\n
    8. Sleiti, A., Sadeq, A. (2019). Thermo-Mechanical Refrigeration System. Atlanta, Georgia: ASHRAE RAL CRC 2019.<\/li>\n
    9. Karbon, M., Sleiti, A. (2018). Large Eddy Simulation for Prediction of Flow in Close-Coupled Elbows. PhD thesis work. Eleven International Conference on Thermal Engineering: Theory and Applications, Vol 2018 (2018): ICTEA 2018<\/a>, Paper number 246, Doha, Qatar. https:\/\/journals.library.ryerson.ca\/index.php\/ictea\/article\/view\/246<\/a>.<\/li>\n
    10. Sleiti, A., Rasras, A., Jafar, M. W., Alam, M., Glushenkov, M., Kronberg, A. (2018). Novel Thermo Mechanical Refrigeration Cycle Utilizing Waste Heat. Eleven International Conference on Thermal Engineering: Theory and Applications, Vol 2018 (2018): ICTEA 2018<\/a>, Paper number 243, Doha, Qatar. https:\/\/caos.library.ryerson.ca\/index.php\/ictea\/article\/view\/243<\/a>.<\/li>\n
    11. Sleiti, A., Naimaster, E. (2018). Energy consumption in office buildings with phase change materials. 11th International Conference on Thermal Engineering: Theory and Applications. Vol 2018 (2018): ICTEA 2018, Paper number 180, Doha, Qatar. https:\/\/journals.library.ryerson.ca\/index.php\/ictea\/article\/view\/180<\/a>.<\/li>\n
    12. Sleiti, A. (2017). ESTIMATION OF ENERGY CONSUMPTION IN OFFICE BUILDINGS USING PHASE CHANGE MATERIALS IN CEILINGS AND EXTERIOR WALLS. Charlotte: American Society of Mechanical Engineers.<\/li>\n
    13. Sleiti, A. (2017). Energy-Efficient HVAC Systems and facilities for commercial buildings. IQPC: 2nd Annual Qatar District Cooling and HVAC.<\/li>\n
    14. Sleiti, A. (2016). Low energy commercial buildings: Application of fuel cell Combined Cooling, Heating and Power (CCHP) systems. Doha: QATAR HVAC CONTRACTING CONFERENCE.<\/li>\n
    15. Sleiti, A. (2016). Sustainability Best Practices: Options to Consider in Qatar. Doha: The ninth gulf municipality conference.<\/li>\n
    16. Sleiti, A. (2016). WRAP UP PANEL | Investigating the Challenges to Implementing District Cooling. Doha: Middle East District Cooling 2016.<\/li>\n
    17. Ahmad K. Sleiti, \u201cFlow and Heat Transfer Measurements of Jet Impingement Arrays with Post Impingement Crossflow\u201d, The 13th International Symposium on Fluid Control, Measurement and Visualization, November15-18, 2015, Doha, Qatar, FLUCOME2015.<\/li>\n
    18. Ahmad K. Sleiti, \u201cSustainability Best Practices: Options to Consider in Qatar\u201d, The ninth gulf municipality conference, April 26 \u2013 28 , 2016, Doha, Qatar http:\/\/gcc.mme.gov.qa\/cui\/index.dox.<\/li>\n
    19. Ahmad Sleiti, Ning Tang, Soheil Razmiar and Aixi Zhou, \u201cGenerator for Gulf Stream Power Take-off\u201d, 2012 Renewable Ocean Energy Research Symposium, Coastal Studies Institute
      \nJennette\u2019s Pier, Nags Head, NC – June 6-7, 2012.<\/li>\n
    20. Edward Naimaster and Ahmad Sleiti, \u201cPotential of phase change material-enhanced constructions in commercial buildings\u201d, IMECE2012-87927, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition, IMECE2012, November 9-15, 2012, Houston, Texas, USA<\/li>\n
    21. Ahmad Sleiti and Aixi Zhou, \u201c Tidal Power Technologies: Generator for superior functionality and blade composite materials\u201d SAMPE TECH 2012, Charleston, SC, 22-25 October 2012. 44th ISTC – Charleston SC – Oct 22-25 \/ 2012. http:\/\/www.nasampe.org\/page\/searchengine#home\/technicalpaperdetails\/578ad889727949c01e519a3b\/<\/a><\/li>\n
    22. Ahmad Sleiti, \u201cEffects of cathode manufacturing method on LSCF-based cathode performance for IT-SOFCs\u201d, SAMPE TECH 2012, Charleston, SC, 22-25 October 2012. 44th ISTC – Charleston SC – Oct 22-25 \/ 2012. http:\/\/www.nasampe.org\/page\/searchengine#home\/technicalpaperdetails\/578ad889727949c01e519a39\/<\/a><\/li>\n
    23. K. Sleiti, \u201cFuel Cell Education for Engineering and Engineering Technology Disciplines\u201d 2011 Conference for Industry and Education Collaboration (CIEC*), San Antonio, TX.<\/li>\n
    24. Edward J. Naimaster IV1, Louremy V. Pe\u00f1a, Ahmad K. Sleiti and Anthony L. Brizendine, \u201cPhase Change Material (PCM)-Enhanced Walls for Energy-Efficient Commercial Buildings\u201d, World Sustainable Energy Days 2011 Conference | Wels, Austria, March 2nd – March 4th, 2011.<\/li>\n
    25. K. Sleiti, \u201cFuel Cell Education for Engineering Disciplines\u201d 2011 Conference for Industry and Education Collaboration (CIEC*), San Antonio, TX.<\/li>\n
    26. Ahmad K. Sleiti, \u201cRheological characteristics of boron nitride nanofluids with polyalpha-olein oil base fluid\u201d, IMECE2011-64942, November 11-17, 2011, Denver, Colorado, USA.<\/li>\n
    27. Blekhman, D., J. Keith, Sleiti<\/strong>, E. Cashman, P. Lehman, R. Engel, M. Mann, and H. Salehfar, 2010, “National Hydrogen and Fuel Cell Education Program Part I: Curriculum,” AC 2010-635 ASEE Annual Conference & Exposition, Louisville, KY. \u201cBest Paper Award\u201d.<\/li>\n
    28. Blekhman, D., J. Keith, Sleiti<\/strong>, E. Cashman, P. Lehman, R. Engel, M. Mann, and H. Salehfar, 2010, “National Hydrogen and Fuel Cell Education Program Part II: Laboratory Practicum,” ASEE Annual Conference & Exposition, Louisville, KY.<\/li>\n
    29. K. Sleiti<\/strong>, “Transient Flow of Air through Rectangular Vents in Horizontal Partition”, ASHRAE Winter Conference, January 2010, Orlando, FL. (Invited paper).<\/li>\n
    30. K. Sleiti<\/strong>, \u201cMultiscale Thermal Transport Phenomena in Dielectric Composites\u201d, 48th AIAA Aerospace Sciences Meeting, January 2010, Orlando, FL.<\/li>\n
    31. Ahmad K. Sleiti<\/strong>, \u201cTransient Thermal Analysis of Electrical Machine\u201d, ASME 2009 International Mechanical Congress and Exposition IMECE2009-11021, November 13-19, 2009, Lake Buena Vista, FL, USA. IMECE2009-11021, pp. 543-548; 6 pages. https:\/\/doi.org\/10.1115\/IMECE2009-11021<\/a><\/li>\n
    32. Ahmad K. Sleiti, Edward J. Naimaster, IV, \u201cHeat Transfer and Pressure Drop through Rectangular Helical Ducts\u201d, ASME 2009 International Mechanical Congress and Exposition IMECE2009-12316, November 13-19, 2009, Lake Buena Vista, FL, USA. IMECE2009-12316, pp. 133-139; 7 pages. https:\/\/doi.org\/10.1115\/IMECE2009-12316<\/a><\/li>\n
    33. K. Sleiti<\/strong>, \u201cHydrogen and Fuel Cell Education\u201d, ASME 2009 International Mechanical Congress and Exposition, IMECE2009-12314, pp. 105-111, November 13-19, 2009, Lake Buena Vista, FL, USA. https:\/\/doi.org\/10.1115\/IMECE2009-12314<\/a><\/li>\n
    34. K. Sleiti<\/strong>, <\/strong>\u201cNew Era in Hydrogen and Fuel Cell Technology Education\u201d, The 2nd International Multi-Conference on Engineering and Technological Innovation: IMETI 2009<\/strong>, <\/strong>July 10th<\/sup> – 13th<\/sup>, 2009 \u2013 Orlando, Florida, USA.<\/strong><\/li>\n
    35. Shruba Ganopadhyay Art\u00ebm E. Masunov, Talgat Inerbaev, Jaruwan Mesit, Ratan K. Guha, Ahmad K. Sleiti<\/strong> and Jay S. Kapat, \u201cPlane wave Density Functional Theory Investigation of Oxygen Migration Energetics and Vacancy Structure Combined With Spectroscopic Study of Barium\/Strontium Ferrate\/Cobaltate (BSCF) as a Promising Material For Solid Oxide Fuel Cell (SOFC)\u201d Baton Rouge, Louisiana, U.S.A. May 25-27, 2010.<\/li>\n
    36. Shruba Ganopadhyay Art\u00ebm E. Masunov, Talgat Inerbaev, Jaruwan Mesit, Ratan K. Guha, Ahmad K. Sleiti<\/strong> and Jay S. Kapat, \u201cDensity functional theory and multiscale simulations combined with spectroscopic study of Barium\/Strontium Ferrate\/Cobaltate (BSCF) as a promising material for solid oxide fuel cell (SOFC)\u201d , ACS Paper #1229211, 237th ACS National Meeting, Salt Lake City, UT, March 22-26, 2009 in Salt Lake City.<\/li>\n
    37. Shruba Ganopadhyay Art\u00ebm E. Masunov, Talgat Inerbaev, Jaruwan Mesit, Ratan K. Guha, Ahmad K. Sleiti<\/strong> and Jay S. Kapat, \u201cFirst Step in Multiscale Simulations of the Ionic Conductors: DFT Study of Oxygen Vacancy MigrationCombined with Experimental Characterization of BSFC\u201d, ICCS 2009: “Compute. Discover. Innovate.”, LSU Center for Computation & Technology, Baton Rouge, Louisiana, U.S.A., May 25-27, 2009W26a. http:\/\/www.science.uva.nl\/sites\/iccs-meeting\/iccs2009\/PosterPapers\/Poster-paper05.pdf<\/a><\/li>\n
    38. Orlovskaya, N., Sleiti, A<\/strong>., Naimaster, E., Bonadies, M., Kapat, J., and Johnson, C., “Impact of Temperature and Porosity on Sc2O3-CeO2-ZrO2 Intermediate Temperature Solid Oxide Fuel Cell Performance,” 47th AIAA Aerospace Sciences Meeting, AIAA-2009-1207, Orlando, FL, 2009.<\/li>\n
    39. K. Sleiti<\/strong>, \u201cBachelor of Science – Engineering Technology Hydrogen and Fuel Cell Education Program Concentration \u2013 I\u201d, ASME 2008 International Mechanical Congress and Exposition (IMECE) IMECE2008-69090, October 31 2008 – November 06 2008, Boston Massachusetts , USA<\/li>\n
    40. K. Sleiti, \u201cEffect of reduced Temperature and Cathode Porosity on the performance of Tubular Solid Oxide Fuel Cell\u201d. Proceedings of ASME 2008 Summer Heat Transfer Conference, HT2008-56447, August 10-14, 2008 Jacksonville, Florida, USA.<\/li>\n
    41. Kursun, A. K. Sleiti and J. S. Kapat, \u201cNUMERICAL INVESTIGATION OF MICROSCALE SLOT JET IMPINGEMENT USING DSMC-IP AND CFD\u201d, Proceedings of IMECE2007, 2007 ASME International Mechanical Engineering Congress and Exposition, November 11-15, 2007, Seattle, Washington, USA.<\/li>\n
    42. Orlovskaya, A. K. Sleiti , J. S. Kapat and C. Johnson, \u201cDevelopment, Testing and Modeling of Button Sc2O3-CeO2-ZrO2Intermediate Temperature Solid Oxide Fuel Cells\u201d, 2007, Fifth International Fuel Cell Science, Engineering and Technology Conference, , June 18 \u2013 20, 2007, New York, USA, Paper Number FuelCell2007-25020.<\/li>\n
    43. A review of thermal and fluid management issues in Solid Oxide Fuel Cells\u201d. Accepted by Fuel Cell Science, Engineering and Technology Conference, June 18 \u2013 20, 2007, New York, USA.<\/li>\n
    44. \u201cComputational Fluid Dynamics Study of High Performance Low Temperature Planar Solid Oxide Fuel Cell (SOFC) using Sc2<\/sub>O3<\/sub>-CeO2-ZrO2<\/sub> Electrolyte\u201d. Fuel Cell Science, Engineering and Technology Conference, June 18 \u2013 20, 2007, New York, USA.<\/li>\n
    45. Nagaiah, N. R., Sleiti, A.K, Rodriguez, S., Kapat, J. S., An, L., \u201cA Novel Design and Analysis of a MEMS Ceramic Hot-Wire Anemometer for High temperature Applications\u201d. <\/em>Proceedings of IMEMS-2006<\/em>, 9-12 May 2006, Singapore.<\/li>\n
    46. Krishnan, H. Zuniga, A. K. Sleiti and J. S. Kapat, \u201cDischarge coefficient and effectiveness measurement for conical shaped film cooling holes\u201d ASME International Mechanical Engineering Congress and RD&D Expo IMECE2005-81713, Orlando, Florida, 2005.<\/li>\n
    47. Quan Liu, K. Sleiti and J. S. Kapat, \u201cApplication of Pressure and Temperature Sensitive Paints for Study of Local Heat Transfer to\u00a0 a Circular Impingement Air Jet\u201d, ASME International Mechanical Engineering Congress and RD&D Expo, IMECE2005-79214, Orlando, Florida, 2005.<\/li>\n
    48. K. Sleiti and R. Kumar, \u201c Effect of Vent Aspect Ratio on Unsteady Laminar Buoyant Flow Through Rectangular Vents in Large Enclosures\u201d, ASME International Mechanical Engineering Congress and RD&D Expo, IMECE2005-81604, Orlando, Florida, 2005.<\/li>\n
    49. K. Sleiti and J. S. Kapat, \u201c Comparison Between EVM and RSM Turbulence Models in Predicting Flow and Heat Transfer in Rotating Rib-Roughened Channels\u201d. Proceedings of ASME Heat Transfer Summer Conference, Paper No: HT-FED2004-56250, pp. 531-542; 12 pages, Charlotte, North Carolina, USA, July 11-15, 2004. <\/strong>https:\/\/doi.org\/10.1115\/HT-FED2004-56250<\/a><\/li>\n
    50. K. Sleiti and J. S. Kapat, \u201c Prediction of Flow Field and Heat Transfer in Channels in Parallel Rotating Mode at High Rotation and Buoyancy Numbers<\/em> \u201d,\u00a0 40th<\/sup> AIAA Fluid Dynamics Conference and Exhibit. AIAA-2004-2554, Portland, Oregon 28 June-July,\u00a0 04.<\/li>\n
    51. K. Sleiti and J. S. Kapat, \u201c Fluid Flow and Heat Transfer Prediction in Curved Ducts at High Rotation and Buoyancy Numbers<\/em> \u201d,\u00a0 ASME Turbo Expo, GT2004-53028, Vienna, June 04.<\/li>\n
    52. K. Sleiti and J. S. Kapat, \u201c Effect of Coriolis and Centrifugal Forces on Turbulence and Heat Transfer at High Rotation and Buoyancy Numbers in Rib-Roughened Internal Cooling Channel<\/em>\u201d, ASME Turbo Expo, GT2004-53018, Vienna, June 04.<\/li>\n
    53. K. Sleiti and J. S. Kapat, \u201c Effect of Coriolis and Centrifugal Forces on Turbulence and Transport at High Rotation and Buoyancy Numbers in Internal Cooling Smooth Channels<\/em>\u201d ,42nd <\/sup>AIAA Aerospace Congress, AIAA-2004-1276, Reno-Nevada Jan. 04.<\/li>\n
    54. Ahmad K. Sleiti, J. S. Kapat, \u201cAn Experimental Investigation of Liquid Jet Array and Single Phase Spray Impingement Cooling Using Polyalphaolefin<\/em> \u201c, ASME International Mechanical Engineering Congress and RD&D Expo, IMECE2003-41754, Washington D.C. November, 2003. Paper No: IMECE2003-41754, pp. 35-42; 8 pages. https:\/\/doi.org\/10.1115\/IMECE2003-41754<\/a><\/li>\n<\/ol>\n

      ***************************************<\/p>\n

      \u00a0<\/strong><\/p>\n

      Patents<\/u><\/strong><\/p>\n